Psionics Home Page
Home Contact Us About Psionics
History of Psionics
Applications of Psionics
Free Ebooks
Uncle Chuckie
If you want to be notified when Uncle Chuckie has new stuff subscribe to the notify list now!
Enter your Email to join List:

Analyzer Box

This is an instrument designed to give the answer of any question as a numerical readout between 0 and 100. It is useful for finding out such things as the percentage of a color in someone's aura or the strength of a radionic transmission.
To make this instrument you will need:
A printout of the pattern
18 ceramic magnets (usually available from Radio Shack)
1 Potentiometer (value unimportant)
1 piece of aluminum foil
1 cardboard box
1 length of wire
1 knob
1 plastic can lid

Making the instrument:
1. Glue the pattern to the top of the cardboard box.
2. Punch a hole for the stem of the potentiometer at the center of the large, calibrated area.
3. Punch a small hole at the center of the box marked Witness.
4. Attach the wire to the potentiometer at any of its points.
5. Attach the potentiometer to the box so that the stem comes out the center of the calibration.
6. Bring the wire out through the center of the witness box and lay it flat in the box. Cut any excess.
7. Glue the foil square over the witness box.
8. Attach the knob to the potentiometer stem.
9. Glue the ceramic magnets to the small circles around the central circle.
To use this instrument:
1. Decide what it is you want to know, such as the amount of blue in the aura of a friend.
2. Place the witness of the subject to be analyzed on the foil plate.
3. While turning the knob, rub the plastic lid with your thumb until you get a stick (you will know it when it happens).

The numerical reading on the dial will be the answer to your question.
 Click Here to Enlarge Graphic